A few tips to fix issues with your Xbox 360 Game Console

If your Xbox 360 game console is facing problems, then you can try to fix it yourself or you can take it you the Xbox repair specialists for fixing issues and making it work as it was earlier. Before trying to troubleshoot your Xbox 360’s problems, try resetting the console by turning it off and on. In addition, check the connections of the power and A/V cables to make sure they are probably plugged in place.

Check the USB ports on the front and back of the console. If the prongs of the USB port are bent and touching the case of the port the USB will short circuit and not allow the Xbox 360 to power on.

If your device is properly plugged in, but the power supply is hot, unplug all connections and let the components cool for at least an hour. If the problem persists after cooling the power supply, you may need to replace the power supply or consult Xbox repair technician for the issues.

If the power supply is in good condition, the problem could be the RF Module card. If it is damaged, you will have to change it. If you still have the same problem after checking the above, then you may have a problem with your motherboard. You may need Xbox repair for soldered joints on the motherboard and its cracks. If this is the case, it is possible to reflow the connections.

If your disc drive tray is stuck and will not open or close, then you have to manually eject the disc. Follow these instructions to remove the front panel and the drive manually. Remove the disc and reinsert the console. If the eject button is still not working, your disc drive may need to be repaired or replaced.

Excessively scratched discs will not be read by the console. Put a clean, unscratched disc in the drive. If your Xbox 360 plays the disc without issue, then the scratched discs were the problem.

The Red Ring of Death has occurred when the top right corner of the light ring are flashing red. A general hardware malfunction has occurred that affects one or more components. The error message is not displayed directly because the console does not open, but it is possible to obtain the secondary error code from Xbox repair gadget.

The three light bugs on the Xbox 360 consoles are not a big part of it, but they are due to overheating. The most common problem is a broken or cold solder joint under the GPU below the motherboard. A flaw in the design of the heat sink allows the motherboard to warm in the area around the chip, which causes the chip to lose contact with the board.

If the RROD is already plaguing your Xbox, and your console is no longer covered by Microsoft’s warranty, there is hope yet. Even if the console does not open, you can still get a secondary error code. Once your Xbox has identified the cause of RROD, you can take action to resolve the problem. The Red Ring faults caused by the CPU or GPU are fixed by calling the Xbox repair technicians who can help you in fixing the respective issues.

For more information, visit our website at http://www.xboxrepairer.co.uk.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s